Skip to main content
 首页 » 编程设计

python之PIR 传感器运动检测计数写入 python 中的文本文件

2025年05月04日9shangdawei

我需要将“pir 传感器”运动检测 COUNT 写入文本文件。

我尝试使用此代码,无需写入文本文件即可工作。当我写入文件时出现错误 file = open("textFile.txt", "w") IndentationError: unindent does not matchanyouter indentation level. 预期输出是文本文件中的最后一个运动计数。

代码是

    # Import required Python libraries 
    import time 
    import RPi.GPIO as GPIO 
    GPIO.setmode(GPIO.BCM) 
    # Define GPIO to use on Pi 
    GPIO_PIR = 7 
 # Set pin as input 
 
  GPIO.setup(GPIO_PIR,GPIO.IN)  
 
 
  Current_State  = 0 
 
Previous_State = 0 
 
    # I put  Variable= 0 for the motion Count 
 Variable= 0 
       try: 
               print "Waiting for PIR to settle ..." 
 
      # Loop until PIR output is 0 
      while GPIO.input(GPIO_PIR)==1: 
        Current_State  = 0 
           print "  Ready" 
 # Loop until users quits with CTRL-C 
  while True : 
 
    # Read PIR state 
    Current_State = GPIO.input(GPIO_PIR) 
 
    if Current_State==1 and Previous_State==0: 
      # PIR is triggered 
      start_time=time.time() 
      print "  Motion detected!" 
 
      # here I need to write numbers for the text file. 
      file = open("textFile.txt", "w") 
      file.write(Variable) 
      file.close() 
      Variable+=1 
 
      # Record previous state 
      Previous_State=1 
    elif Current_State==0 and Previous_State==1: 
      # PIR has returned to ready state 
      stop_time=time.time() 
      print "  Ready ", 
      elapsed_time=int(stop_time-start_time) 
      print " (Elapsed time : " + str(elapsed_time) + " secs)" 
      Previous_State=0 
 
except KeyboardInterrupt: 
  print "  Quit" 
  # Reset GPIO settings 
  GPIO.cleanup() 

请您参考如下方法:

import RPi.GPIO as GPIO 
import time 
 
# Use BCM GPIO references 
# instead of physical pin numbers 
GPIO.setmode(GPIO.BCM) 
 
# Define GPIO to use on Pi 
GPIO_PIR = 7 
 
print "PIR Module Test (CTRL-C to exit)" 
 
# Set pin as input 
GPIO.setup(GPIO_PIR,GPIO.IN)      # Echo 
 
Current_State  = 0 
Previous_State = 0 
Variable=0  
 
try: 
 
  print "Waiting for PIR to settle ..." 
 
  # Loop until PIR output is 0 
  while GPIO.input(GPIO_PIR)==1: 
    Current_State  = 0     
 
  print "  Ready"     
 
  # Loop until users quits with CTRL-C 
  while True : 
 
    # Read PIR state 
    Current_State = GPIO.input(GPIO_PIR) 
 
    if Current_State==1 and Previous_State==0: 
      # PIR is triggered 
      print "  Motion detected!" 
      # Record previous state 
      Previous_State=1 
      file = open("textFile.txt", "w") 
      file.write(Variable) 
      file.close() 
      Variable+=1 
    elif Current_State==0 and Previous_State==1: 
      # PIR has returned to ready state 
      print "  Ready" 
      Previous_State=0 
 
    # Wait for 10 milliseconds 
    time.sleep(0.01)       
 
except KeyboardInterrupt: 
  print "  Quit" 
  # Reset GPIO settings 

这是我 friend 的代码。 (我相信你的代码没有任何问题,但有一些缩进错误(例如间距错误)为此你可以使用某种文本编辑器(我使用 sublime text)