在 Project Euler 上做一些问题,我遇到了 Langdon's Ant并认为尝试用 Python 编写动画代码是个好主意。作为基础,我使用了 matplotlib 函数动画,在这篇文章中可以看到一个非常好的例子 here
我已经设法让一个版本工作,代码如下所示。这个想法是用一个大矩阵模拟 Ant 移动的黑白网格,并用“imshow”绘制该矩阵。
import numpy as np
from matplotlib import pyplot as plt
from matplotlib import animation
# Initialize the Simulation
dim=50
a=np.matrix(np.zeros((dim,dim)))
pos=np.matrix([[dim//2],[dim//2]]) # current position of ant
direction=np.matrix([[1],[0]]) # direction ant is currently moving
#Rotation Matrices
clock=np.matrix([[0,1],[-1,0]])
counter=np.matrix([[0,-1],[1,0]])
def takestep(a,pos,direction):
pos[:]=pos+direction
if a[pos[0,0],pos[1,0]]==0: #landed on white
a[pos[0,0],pos[1,0]]=1
direction[:]=clock*direction
else:
a[pos[0,0],pos[1,0]]=0
direction[:]=counter*direction
#Plotting
fig = plt.figure()
im=plt.imshow(a,interpolation='none')
def init():
im=plt.imshow(a,interpolation='none')
return [im]
def animate(i):
takestep(a,pos,direction)
im=plt.imshow(a,interpolation='none')
#im.set_data(np.array(a))
return [im]
anim = animation.FuncAnimation(fig, animate, init_func=init,
frames=200, interval=0, blit=True)
这段代码是有效的,但我不清楚某些地方:
动画连续运行(直到 Ant 出界)并且 200帧后不重置
即使间隔设置为0,动画运行也相当缓慢,大约一秒更新两次
我想我可以通过使用 im.set_data() 函数(在代码中注释掉)来加速它,但在我的实现中这不起作用(不变的可视化)
如果有人能给我一些关于如何改进此动画的指示,那就太好了,在此先感谢!
最好的问候, 拉斐尔
请您参考如下方法:
下面是如何使用 im.set_data 提高每秒帧数。
import numpy as np
from matplotlib import pyplot as plt
from matplotlib import animation
# Initialize the Simulation
dim = 50
a = np.matrix(np.zeros((dim, dim)))
pos = np.matrix([[dim // 2], [dim // 2]]) # current position of ant
direction = np.matrix([[1], [0]]) # direction ant is currently moving
# Rotation Matrices
clock = np.matrix([[0, 1], [-1, 0]])
counter = np.matrix([[0, -1], [1, 0]])
def takestep(a, pos, direction):
pos[:] = pos + direction
if a[pos[0, 0], pos[1, 0]] == 0: # landed on white
a[pos[0, 0], pos[1, 0]] = 1
direction[:] = clock * direction
else:
a[pos[0, 0], pos[1, 0]] = 0
direction[:] = counter * direction
fig = plt.figure()
im = plt.imshow(a, interpolation='none', vmin=0, vmax=1)
def animate(i):
takestep(a, pos, direction)
im.set_data(a)
return [im]
anim = animation.FuncAnimation(fig, animate,
frames=200, interval=0, blit=True,
repeat=False)
plt.show()
- 使用
repeat=False在 200 帧后停止动画。 - 在对
imshow的初始调用中设置vmin=0, vmax=1。对plt.imshow的初始调用设置了vmin和vmax,它们控制值和颜色之间的对应关系。该设置用于 imshow AxesImage 的所有后续渲染。由于初始plt.imshow使用全零数据,vmin和vmax都设置为 0(初始数据的最小值和最大值).这使得所有 值都显示为相同的颜色。因此,要阻止这种情况发生,请自行提供vmin和vmax。
