我在 axis_grid 工具包中遇到 make_axes_locatable/append_axes 问题,当函数调用是嵌套时,例如,
divider1 = make_axes_locatable(ax1)
divider2 = make_axes_locatable(divider1.append_axes(...))
如果我使用上面的代码创建 3 个轴,如 (4,5,6) ,则主轴 (ax4) 隐藏在右侧其他两个轴的后面(参见下图和 this gist )。我想 make_axes_locatable/append_axes 不应该以这种方式使用。
我想要的只是将颜色条不放在 ax1 的顶部(如下图 - this gist ),而是放在表格下方的空白区域。 make_axes_locatable 的优点是,如果我调整它的大小,图形仍然看起来不错,这与使用 fig.add_axes() 手动创建轴对象形成对比(代码在 4 的末尾).
谁能告诉我如何拆分右轴 (ax2) s.t.表格下方的所有空间都用于颜色栏及其刻度标签?
请您参考如下方法:
我不确定您是否可以仅使用 AxesDivider.append_axes 来执行此操作,因为根据 documentation该方法“在给定位置创建一个与主轴具有相同高度(或宽度)的轴。”您希望右侧的轴与左侧的轴具有不同的高度。
另一种选择是创建两个子图并使用分隔线将右边的子图分开:
import matplotlib.pyplot as plt
from mpl_toolkits.axes_grid1 import make_axes_locatable
ax = plt.subplot(121)
ax2 = plt.subplot(122)
divider = make_axes_locatable(ax2)
ax3 = divider.append_axes("bottom", size="50%", pad=0.5)
plt.show()
或者直接创建一个Divider(不使用makes_axes_locatable),如图here及以下:
import matplotlib.pyplot as plt
from mpl_toolkits.axes_grid import Divider
import mpl_toolkits.axes_grid.axes_size as Size
fig1 = plt.figure(1, (5.5, 4.))
# the rect parameter will be ignore as we will set axes_locator
rect = (0.1, 0.1, 0.8, 0.8)
ax = [fig1.add_axes(rect, label="%d"%i) for i in range(3)]
horiz = [Size.Scaled(1.5), Size.Fixed(.5), Size.Scaled(1.),
Size.Scaled(.5)]
vert = [Size.Scaled(1.), Size.Fixed(.5), Size.Scaled(1.5)]
# divide the axes rectangle into grid whose size is specified by horiz * vert
divider = Divider(fig1, rect, horiz, vert, aspect=False)
ax[0].set_axes_locator(divider.new_locator(nx=0, ny=0, ny1=3))
ax[1].set_axes_locator(divider.new_locator(nx=2, ny=2))
ax[2].set_axes_locator(divider.new_locator(nx=2, ny=0))
plt.show()
或者如果根本没有理由使用 Divider,您可以使用 GridSpec :
import matplotlib.pyplot as plt
ax1 = plt.subplot2grid((2,2), (0,0), rowspan=2)
ax2 = plt.subplot2grid((2,2), (0, 1))
ax3 = plt.subplot2grid((2,2), (1, 1))
plt.show()
所有这三个选项都会创建类似这样的东西:
当我调整它们的大小时,所有这三个看起来都不错,至少在这个简单的例子中是这样。
编辑 您可以使用 gridspec 和 Subplot 获取左侧纵横比为 1 的轴和右侧一对与顶部和底部对齐的轴左轴。诀窍是使用 width_ratios 和 height_ratios 设置 gridspec 的纵横比。调整此图的大小时,右轴的顶部和底部仍将与左侧轴的顶部和底部对齐。
import matplotlib.pyplot as plt
import matplotlib.gridspec as gridspec
fig = plt.figure()
# grid spec for left and right columns
gs0 = gridspec.GridSpec(1, 2,width_ratios=[1,1], height_ratios=[1,1])
# gird spec for left axes with aspect ratio of 1
gs00 = gridspec.GridSpecFromSubplotSpec(1, 1, subplot_spec=gs0[0], width_ratios=[1], height_ratios=[1])
ax1 = plt.Subplot(fig, gs00[0])
fig.add_subplot(ax1)
# grid spec for two right axes
gs01 = gridspec.GridSpecFromSubplotSpec(2, 1, subplot_spec=gs0[1])
ax2 = plt.Subplot(fig, gs01[0])
ax3 = plt.Subplot(fig, gs01[1])
fig.add_subplot(ax2)
fig.add_subplot(ax3)
plt.show()
