Skip to main content
 首页 » 编程设计

python之有没有办法在代码中使用 np.array

2025年05月04日8yxwkf

我想知道是否有办法将这段代码转换为 np.array 代码。然后将其添加到 link .我想添加一个球发射的角度。

import numpy as np 
import scipy as sp 
from scipy.integrate import ode 
import matplotlib.pylab as pl 
import matplotlib.pyplot as plt 
import math 
from matplotlib import* 
from matplotlib.pyplot import * 
from __future__ import division 
import math 
 
 def projectile_xy(initPos,g,initVel): 
    data_xy = [] 
    initTime = 0.0 
    while True: 

现在计算高度y

        y = initPos + (initTime * initVel * math.sin(theta)) - (g * initTime * initTime)/2 

弹丸已击中地面

        if y < 0: 
            break 

计算距离x

        x = initVel * math.cos(theta) * initTime 

将 (x, y) 元组添加到列表中

        data_xy.append((x, y)) 

以0.1秒为增量使用时间

        initTime += 0.1 
    return data_xy 
 
g = 9.8 
#h = float(raw_input("Enter the height ")) 
initPos = float(raw_input("Enter the height ")) 
der = float(raw_input("Enter the angle ")) 
#v = float(raw_input("Enter velocity "))  
initVel = float(raw_input("Enter velocity "))  
 
 
theta = math.radians(der)  # radians 
data_der = projectile_xy(initPos,g,initVel) 

找到最大高度...

point_height_max = max(data_der, key = lambda q: q[1]) 
xm, ym = point_height_max 
x_max = max(data_der)[0] 
 
print(''' 
Projectile Motion ... 
Using a firing angle of {} degrees 
and a muzzle velocity of {} meters/second 
the maximum height is {:0.1f} meters 
at a distance of {:0.1f} meters'''.format(der, initVel, ym, xm)) 
print "maximum distance" ,(x_max) 

输入高度1 输入角度 45 输入速度 30

Projectile Motion ... 
Using a firing angle of 45.0 degrees 
and a muzzle velocity of 30.0 meters/second 
the maximum height is 24.0 meters 
at a distance of 46.7 meters 
maximum distance 91.2167747731 

请您参考如下方法:

您可以采用这种方法:

import numpy as np 
 
linear_vel = 20 
ang = np.pi/3 
y=10 
x=12 
g=9.8 
y_vel =  linear_vel*np.cos(ang) 
x_vel =  linear_vel*np.sin(ang) 
 
 
t = (y_vel+np.sqrt(y_vel**2+2*g*y))/g   #time when projectile hits               ground 
n= 20 #number of instances of time you want 
 
time_values = np.linspace(0,int(t),n) 
axes = np.zeros((2,n)) 
 
for i in range(0,n): 
    axes[0,i]=x_vel*time_values[i] 
    axes[1,i]=y_vel*time_values[i]-0.5*g*time_values[i]**2 
 
 
 
#print time_values 
#print axes