**************************************解决方案*********** *****************
经过大量测试和一些调整后,我成功地编写了一个工作代码!
我正在与所有人分享它,以防有人有兴趣执行与我相同的操作。 对于所有提供帮助的人 - 我谢谢你们! :)
stringToSearchIn = open('FileName.py').read()
def findBetween(file, firststring, laststring, findstring):
start = 0
countfinal = 0
while True:
try:
start = file.index(firststring, start)
except:
break
try:
end = file.index(laststring, start)
count = file[start:end].count(findstring)
countfinal = count + countfinal
start = end
except:
break
return countfinal
print findBetween(stringToSearchIn, "example", "file", "letters")
*********************************最终解决方案************ ***************
我已经尝试解决这个问题很长一段时间了,我相信我已经把复杂的事情放在心上了。 我写起来甚至有点复杂,但我会尽力而为。如果有什么不清楚的地方,请随时提问!
请不要为我编写代码。我是来学习的,不是来抄袭的:)
例如:
#This is the entire text I want to scan
s = open('test.py').read()
#I want to go through the entire file and find the string between these two strings:
stringStartToSearch = "example"
stringEndToSearch = "file"
#Next, I want to count the number of times a certain string is located
#between the previously found string.
stringSearch = "letters"
为了进一步说明,假设这是在“test.py”文件中找到的字符串:
#An example text that I have many letters in, just to give and example for a file.
#It's an example with many letters that I made especially for this file test.
#And these are many letters which should not be counted
如您所见,单词“letters”在该文件中出现了 3 次,但在“example”和“file”之间只有 2 次 。这就是我要计算的。
有谁知道实现此目的的高效 pythonic 方法?
非常感谢!
给你sabbahillel
脚本确实在 2 个给定字符串之间找到了正确的字符串,但是在找到之后停止。我需要它继续搜索整个文件,并且在找到后不会停止。 此外,在我找到这两个字符串之间的字符串后,我需要遍历它并计算某个单词显示的次数。这可以通过哪个命令实现?
file = open('testfile.py').read()
def findBetween(file, firstWord, secondWord):
start = file.index(firstWord)+len(firstWord)
end = file.index(secondWord, start)
return file[start:end]
print findBetween(file, "example", "file")
请您参考如下方法:
让我们假设您有您提供的字符串列表。
列表.索引(x)
返回值为 x 的第一项在列表中的索引。如果没有这样的项目是一个错误。
获取开始索引和结束索引。如果 begin 和 end 都存在,并且 end 的索引大于 start 的索引,则只需使用 start 和 end 索引上的范围进行处理即可获取所需的元素。
当然,如果您有开始指示符但到达列表末尾没有结束指示符(作为必须处理的错误情况的示例),您必须进行适当的错误检查并决定要做什么)
请注意,list.index() 会查找第一个出现的起始字符串。如果还有更多,则从第一次出现结束字符串开始范围,然后再做一次。这可以在适当的 do ... while 循环中完成,while 循环检查是否再次出现起始字符串。
请注意,如果列表中再次出现起始字符串,则不会将其视为重新开始,而只是另一个条目。
mylist = ('string' 'start' 'string' 'start' 'string' 'end' 'string)
将处理
('start' 'string' 'start' 'string' 'end')
因此我们现在
start = 0
while True:
try:
start = mylist[start:].index(firststring)
except:
# index did not find start string. nothing to do, force exit
break
try:
end = mylist[start:].index(laststring)
count = mylist[start:end].count(findstring)
# process findstring
start = end # set up for the next loop
except:
# index did not find end string but did find start
count = mylist[start:].count(findstring)
# process findstring
break # reached the end of the list, exit the while
现在您有了开始和结束索引
索引、切片和矩阵
因为列表是序列,索引和切片对列表的工作方式与对字符串的工作方式相同。所以只需使用 list[a:b].count(string) 和适当的切片指示符..
list.count(对象)
返回 obj 在列表中出现的次数
