Skip to main content
 首页 » 编程设计

python之根据方向键移动 turtle

2025年04月02日2098°冷暖

<分区>

我试图让我的 turtle 根据键盘上的箭头键移动。有谁知道如何让 python 3.2.2 中的 turtle 根据我的箭头键命令移动?顺便说一句,如果这有什么影响的话,我的 turtle 是坦克的形式。这是我的代码:

import turtle 
 
unVar1 = 25 
unVar2 = 100 
unVar3 = 90 
unVar4 = 150 
unVar5 = -30 
unVar6 = 75 
unVar7 = 50 
def polySquare(t, x, y, length): 
    t.goto(x, y) 
    t.setheading(270) 
 
    t.begin_poly() 
 
    for count in range(4): 
        t.forward(length) 
        t.left(90) 
 
    t.end_poly() 
 
    return t.get_poly() 
 
def polyRectangle(t, x, y, length1, length2): 
    t.goto(x, y) 
    t.setheading(270) 
 
    t.begin_poly() 
 
    for count in range(2): 
        t.forward(length1) 
        t.left(90) 
        t.forward(length2) 
        t.left(90) 
 
    t.end_poly() 
 
    return t.get_poly() 
 
def tankCursor(): 
 
    """ 
    Create the tank cursor.  An alternate solution is to toss the temporary turtle 
    and use the commented out polygon assignments instead of the poly function calls 
    """ 
 
    temporary = turtle.Turtle() 
 
    screen = turtle.getscreen() 
 
    delay = screen.delay() 
 
    screen.delay(0) 
 
    temporary.hideturtle() 
    temporary.penup() 
 
    tank = turtle.Shape("compound") 
 
    # tire1 = ((10, unVar1), (10, unVar1 - unVar6), (10 + 30, unVar1 - unVar6), (10 + 30, unVar1)) 
    tire1 = polyRectangle(temporary, 10, unVar1, unVar6, 30)  # Tire #1 
    tank.addcomponent(tire1, "gray", "black") 
 
    # tire2 = ((110, unVar1), (110, unVar1 - unVar6), (110 + 30, unVar1 - unVar6), (110 + 30, unVar1)) 
    tire2 = polyRectangle(temporary, 110, unVar1, unVar6, 30)  # Tire #2 
    tank.addcomponent(tire2, "gray", "black") 
 
    # tire3 = ((110, unVar2), (110, unVar2 - unVar6), (110 + 30, unVar2 - unVar6), (110 + 30, unVar2)) 
    tire3 = polyRectangle(temporary, 110, unVar2, unVar6, 30)  # Tire #3 
    tank.addcomponent(tire3, "gray", "black") 
 
    # tire4 = ((10, unVar2), (10, unVar2 - unVar6), (10 + 30, unVar2 - unVar6), (10 + 30, unVar2)) 
    tire4 = polyRectangle(temporary, 10, unVar2, unVar6, 30)  # Tire #4 
    tank.addcomponent(tire4, "gray", "black") 
 
    # bodyTank = ((20, unVar3), (20, unVar3 - 130), (20 + 110, unVar3 - 130), (20 + 110, unVar3)) 
    bodyTank = polyRectangle(temporary, 20, unVar3, 130, 110) 
    tank.addcomponent(bodyTank, "black", "gray") 
 
    # gunTank = ((65, unVar4), (65, unVar4 - 100), (65 + 20, unVar4 - 100), (65 + 20, unVar4)) 
    gunTank = polyRectangle(temporary, 65, unVar4, 100, 20)   # Gun 
    tank.addcomponent(gunTank, "black", "gray") 
 
    # exhaustTank = ((50, unVar5), (50, unVar5 - 20), (50 + 10, unVar5 - 20), (50 + 10, unVar5)) 
    exhaustTank = polyRectangle(temporary, 50, unVar5, 20, 10) 
    tank.addcomponent(exhaustTank, "black", "gray") 
 
    # turretTank = ((50, unVar7), (50, unVar7 - 50), (50 + 50, unVar7 - 50), (50 + 50, unVar7)) 
    turretTank = polySquare(temporary, 50, unVar7, 50)  # Turret 
    tank.addcomponent(turretTank, "red", "gray") 
 
    turtle.addshape("tank", shape=tank) 
 
    del temporary 
 
    screen.delay(delay) 
 
tankCursor()  # creates and registers the "tank" cursor shape 
 
turtle.shape("tank") 
 
turtle.up()  # get rid of the ink 
 
# show our tank in motion 
while True: 
    turtle.forward(100) 
    turtle.left(90) 
    turtle.forward(100) 
    turtle.left(180) 
    turtle.forward(200)